Golden Ads · Practical printing guidance

Paper GSM is not thickness: read the specification before choosing an indoor print

Separate paper mass, thickness, opacity and surface finish, then calculate a useful sheet-weight estimate without treating GSM as a quality or lifespan guarantee.

Turn a vague request for heavier paper into a practical question

Asking for the heaviest paper can conceal several different needs. You might want a sheet that feels substantial when handed over, hides a dark background, fits an existing holder, or looks quieter under a nearby lamp. Those are not interchangeable requirements. Before comparing numbers, describe the difficulty you want the material to solve. A photograph viewed at a desk and a temporary information poster do not necessarily need the same physical behaviour.

A useful specification separates its measurements rather than combining them into a single quality score. ISO publishes distinct methods for grammage, thickness and opacity; the names themselves identify different questions. Keep a note with separate spaces for mass per area, thickness, opacity and surface description. An empty space means a fact is still unknown, not that a larger GSM number supplies the answer. Only compare materials actually confirmed for the intended printing process.

Calculate the mass of the sheet rather than weighing the label

GSM means grams per square metre. Arctic Paper's glossary describes grammage as the weight in grams of one square metre of a paper product. It is a mass-per-area description, not the weight of every sheet sold under that label. A small sheet and a large sheet cut from the same nominal material share the GSM value while containing different amounts of paper. Use it for a clearly labelled nominal estimate.

For a worked example, a rectangular print measuring 500 by 700 mm has an area of 0.5 multiplied by 0.7, or 0.35 square metres. At a hypothetical 200 GSM, its nominal paper mass is 70 grams. Ten such sheets would contain about 700 grams of paper. These are arithmetic illustrations, not available product specifications. Ink, protective materials, a tube or box and any extra supplied border are excluded. Calculate the actual outer sheet, not just its visible image area.

Read thickness in its own units and on its own evidence

Thickness is a distance through the sheet. A specification may express it in millimetres or micrometres; 1,000 micrometres equal one millimetre. ISO 534 distinguishes single-sheet thickness from a bulking measurement made using a pack of sheets. When a holder has a thickness limit, record the manufacturer's relevant figure and measurement basis instead of converting GSM through a guessed universal multiplier.

Published manufacturer examples make the distinction tangible. Hahnemühle's Photo Rag 308 data sheet lists 308 GSM and a typical thickness of 0.48 mm. Its Photo Rag Baryta sheet lists 315 GSM and 0.43 mm. In that particular comparison, the material with the larger mass-per-area figure has the smaller stated thickness. These are illustrative manufacturer values, not claims that Golden Ads stocks either material or that every batch has an identical measured thickness.

Ask what must remain hidden behind the print

Opacity is another separate property. ISO 2471 describes a paper-backing opacity test using diffuse reflectance; it is not a thickness test. Do not treat a grammage figure as an opacity measurement or turn a laboratory percentage into a promise about every display setting. A practical question is whether the intended backing, old notice or pattern behind the sheet will interfere with the visible design.

For an indoor notice placed over an existing coloured surface, compare a relevant material sample over both a plain backing and a representative piece of that surface, if samples are available. Keep the viewing position and light similar while comparing. This is a visual decision exercise, not a standards-compliance test. Light shining from behind the sheet is a different display condition again; ordinary paper should not be assumed to be an approved illuminated-display medium.

Keep the finish description beside the weight figure

A surface description supplies information that the mass figure cannot. The same Hahnemühle documents describe Photo Rag 308 as matt and Photo Rag Baryta as high-gloss. The names and individual data fields matter more than ranking the two weights. Read the actual product description, including whether a term refers to the base, the coating or the visible surface, rather than treating every similar-sounding paper name as equivalent.

Write your own visual priority in ordinary language: a subdued surface beside a reading area, a particular photographic appearance, or a material that suits an existing display arrangement. Then check the actual proposed material against that priority. This avoids a common purchasing detour in which an impressive number wins even though it answers none of the display questions. Do not infer waterproofing, scratch resistance or a promised display lifetime from a finish label.

Use bulk to understand comparisons, not to invent missing data

Arctic Paper explains bulk as the relationship between thickness and grammage, and notes that papers with equal grammage can have different thicknesses. This helps explain why two sheets with similar weights can feel unlike one another. It does not provide permission to fill every missing field with a familiar figure from a different product. A material's own technical information remains the appropriate starting point for a critical fit decision.

Suppose a display holder accepts a limited sheet thickness. Asking only whether a print is heavier than ordinary office paper misses the constraint. First identify the holder's stated limit, then obtain the thickness for the exact proposed material. If either fact is missing, leave the fit unresolved. Do not stack unrelated samples, squeeze them by hand and present the result as a certified measurement or a guarantee that a whole print run will fit.

Budget the mass of the complete job without predicting parcel size

The area calculation is useful when planning a set, especially when people collect different quantities. Twelve hypothetical 500 by 700 mm sheets at 200 GSM contain about 840 grams of paper before other materials. If the outer sheet becomes 540 by 740 mm, each sheet's area is 0.3996 square metres and its nominal paper mass becomes 79.92 grams. A border changes the calculation even when the central photograph is unchanged.

Keep those figures separate from a postage quotation. A mass estimate does not establish whether a material may safely be rolled, which direction is suitable, the required tube diameter or the protective packing needed. Nor does it include packaging mass or prove a carrier's dimensional admission. Tell the supplier the full dimensions and quantity and use a confirmed delivery option for that actual order. Do not choose a smaller parcel by silently folding or cropping the print.

Compare two real candidates using a short decision record

Imagine an organiser choosing paper for a small set of indoor programme posters. The first candidate has a complete specification but a surface the organiser dislikes; the second has a preferred appearance but no confirmed compatibility with the intended process. Neither problem is solved by choosing whichever GSM value is higher. Record the needed appearance, backing condition, outer dimensions, quantity and any holder constraint, then identify the missing evidence for each candidate.

A useful conclusion might be to select the confirmed compatible option, find another approved material, or postpone the specification until the missing information is available. Avoid creating a false binary between cheap-looking paper and the maximum weight on a list. A well-defined job can justify a modest specification. An unresolved technical requirement can also justify not ordering yet, without turning the question into a claim that a particular brand is universally superior.

Hand over the selected material without adding unstated services

Your final note should name the actual available material, its stated grammage and finish, the outer print dimensions and the number of copies. Include a verified thickness or opacity requirement only where it genuinely affects the job. Keep comparison products clearly labelled as references rather than substitutions. A material that appeared in this explanation is not automatically an orderable Golden Ads option, and a published manufacturer sheet is not evidence of today's studio stock.

The custom service remains printing from your finished file. Framing, mounting, fittings, stretching and installation are not implied by selecting a heavier substrate. Postal arrangements must be confirmed for the specific order; Manchester collection is by prior appointment after readiness is confirmed. The purpose of reading the paper specification is a clearer buying decision, not an assurance of indestructibility, archival permanence or a particular result from an unverified display method.

Questions and answers

Can I convert a GSM value directly into millimetres?

Not with a universal multiplier. Grammage describes mass per area, while thickness needs its own material-specific value and measurement basis.

Does a heavier paper necessarily hide its backing better?

Do not infer a specific opacity from weight alone. Check the actual material's opacity information and assess a relevant sample against the intended backing where possible.

Does 300 GSM mean that my individual print weighs 300 grams?

Only a square metre would have that nominal paper mass. Multiply the actual outer area in square metres by the stated GSM, before considering ink or packing.

Are the named Hahnemühle papers available to order from Golden Ads?

They are technical comparison examples, not a stock list. Use only the material and specification explicitly confirmed for your actual print order.

Further reading