Golden Ads · Practical printing guidance

Write a useful custom-size print enquiry without confusing the image with the supplied sheet

Explain the intended print dimensions, units, image treatment, material, copies and receiving needs clearly, without assuming a custom size, deadline or delivery option is available.

Describe the finished print you want rather than the file you happen to have

A custom-size enquiry should explain the object you hope to receive. A filename, a photograph of a wall or a statement that the image is high resolution leaves several different questions unanswered. Begin with the intended use and the finished rectangle you are asking about. For example, describe a single indoor photographic print for an existing display space, rather than asking a supplier to infer its size and presentation from the source image alone.

Keep the request distinct from a confirmation that the job can be accepted. An enquiry is useful precisely when a dimension, material or practical arrangement needs checking. It does not reserve stock, establish a price or start production. Golden Ads' custom scope is printing a finished supplied design, not measuring your premises, making a frame or deciding how an unprepared composition should be cropped. State what you know and name the decision on which you need a response.

Give both dimensions with explicit units and a clear order

Write width and height separately and include the unit with each, particularly when information has been copied between applications or discussed verbally. NIST's SI prefix table identifies centi as one hundredth and milli as one thousandth of a base unit. A number in centimetres therefore cannot be substituted unchanged into a millimetre field. Do the conversion once and keep one consistent unit throughout the enquiry so the intended rectangle is easy to reconstruct.

For an illustrative example, a requested width of 45 cm and height of 70 cm equals 450 mm by 700 mm. Writing 45 by 70 without units could describe a very different print. These numbers do not indicate an available Golden Ads size. If the orientation matters, describe the intended upright reading direction too. Do not rely on portrait or landscape alone to communicate dimensions, and do not assume a photograph's original physical-size metadata is the size you wish to purchase.

Identify whether the numbers describe image area or outer material

Say whether your measurement is for the visible picture, the complete design or the full supplied sheet including any border. A holder opening, an image rectangle and an outer print can have different dimensions. Label them instead of using size for all three. If you know only a holder's opening, explain that limitation and obtain the relevant holder requirements separately rather than assuming the printer can determine the missing fit allowance from its appearance.

Adobe's Canvas Size documentation distinguishes the surrounding composition area from changing the image itself. That is a useful reminder when describing a file that already includes empty space: adding a border in the design is not the same instruction as enlarging the photograph. Explain what is already present and what you are requesting. Do not add an assumed production border twice or describe a decorative rectangle in the artwork as a physical mount supplied with the print.

State the treatment you intend if the image and rectangle differ

If preserving the complete photograph matters, say so. If you have already prepared a deliberate crop inside the finished design, identify that as the intended version. A supplier should not have to guess whether a mismatch in proportions means crop, spare space, another size or distortion. Keep the request focused on an agreed finished file rather than authorising unspecified automatic changes merely to make the numbers fit.

You may need to return to the designer or source image before the enquiry can become an order. That is different from asking a print-only service to choose the composition for you. Provide an explanatory sketch if useful, clearly labelled as a reference rather than the production master. Do not draw a rectangle over a phone screenshot and assume that it establishes exact measurements, additional image detail or an approved instruction to remove content around the subject.

Describe the material and environment without assuming availability

Explain whether you are asking about paper, a photographic surface or rolled canvas, and what the print is intended to do indoors. Name an exact material only if it is genuinely part of your request, not a product guessed from an unrelated catalogue. If you do not know which confirmed option is appropriate, describe the relevant requirement plainly. Do not ask for every additional finish merely because another supplier's menu lists it.

Canon's PRO-series paper-size manual sets equipment-specific media conditions; those conditions are not a live studio stock list or a promise to accept every possible custom rectangle. Available material, supported job dimensions and the actual service specification still need confirmation. Golden Ads does not offer outdoor PVC, eyelets, installation or waterproofing through this enquiry guide. Keep any rolled-canvas finishing or other work you plan to arrange elsewhere distinct from the printed material you are requesting.

Distinguish the number of designs from the copies of each

Write one clear line for each distinct finished design, with its own requested dimensions, material and copies. Two different images printed once each are not the same production instruction as two copies of one image. If several versions are merely alternatives for your own decision, label them as alternatives rather than asking for a quotation that accidentally treats all of them as purchases. Keep the enquiry short enough that the intended quantities can be totalled without interpretation.

For example, a hypothetical request might contain one wide photograph in two copies and a different upright design in one copy. Name each independently; do not rely on the order in which attachments appear. Repeated source filenames need not prevent you identifying them through your own design references. Prepare separate supported single-page production files if the request proceeds, rather than assuming a multi-page planning sheet or compressed folder is accepted by the ordering process.

Supply enough source information without sending unnecessary private material

Identify whether the finished production file is ready or still being prepared. State the available file type and relevant source dimensions if asked through an appropriate channel, while keeping your requested physical print dimensions clear. A small preview may explain the enquiry but should be labelled as a preview. It should not silently replace the intended source or suggest that the quality of an enlargement has already been established.

Share only the material necessary for the actual discussion using the service's supported process. Do not include payment-card details, passwords, unrelated personal documents or an entire private photograph collection in order to explain one print. If the image contains information not intended for the supplied design, prepare and inspect the appropriate finished version yourself. This is practical minimisation advice, not a claim that an enquiry channel provides a particular security certification or removes hidden information automatically.

Separate a required arrival date from a promised production date

State when the print is needed and explain any genuinely fixed event or handover requirement. Distinguish the date by which it must be in your possession from a date when it could be dispatched or ready for collection. Do not write urgent instead of the actual requirement and assume the missing production and travel time has been agreed. A desired date is a question for the supplier to assess, not a guaranteed deadline created by the enquiry itself.

Describe the receiving arrangement as well. If asking about delivery, provide the relevant destination information through the appropriate process so practical admission can be checked; do not infer a universal rate from the print's area. If asking to collect in Manchester, wait for confirmation that the job is ready and that an appointment has been agreed. A custom print request does not establish walk-in opening hours, reserved collection capacity, same-day service or a particular courier commitment.

Check that the reply answers the same specification you sent

Compare any response with the requested outer dimensions, image intention, material, copies and receiving requirement. If an alternative is proposed, identify precisely what changed before treating it as the original request. A quoted size may describe a different region of the design, or a suggested material may require a decision you have not made. Ask a focused follow-up rather than replying approved to a specification whose terms remain ambiguous.

Once the details are settled, use the actual available ordering route and terms, supplying the finished file rather than the explanatory notes as artwork. Keep the confirmed specification in your own records. Neither this guide nor the enquiry itself changes prices, adds unsupported services or commits Golden Ads to a custom job. The practical benefit is a question that can receive a clear answer, without turning an uncertain request into an accidental purchase or an assumption about what printing includes.

Questions and answers

Should I send the original photograph's recorded size as my requested print size?

State the physical output you want separately. File metadata or a source filename does not communicate the intended purchased dimensions, outer sheet or image area by itself.

Do I need to know the exact material before making an enquiry?

Explain the intended indoor use and any real requirement if the material is uncertain. Ask about confirmed options without assuming stock, outdoor suitability or additional finishing services.

Does giving an event date guarantee delivery by that day?

No. Identify the required arrival or collection date and wait for actual confirmation. A request is not a production, courier or appointment commitment.

Is an enquiry or suggested alternative already an order?

Do not assume so. Resolve the specification and use the actual supported ordering process and terms. Check every changed dimension, material, quantity and receiving arrangement before proceeding.

Further reading